US flat steel prices continued to advance this week amid reports of steady pre-July 4 holiday demand for flat steel products and continued claims of tight availability from domestic mills, though several contacts told SteelOrbis they think flat steel pricing may be at or near peak.
And, while flat steel markets may be or approaching the end of a historic price rally that began to post in early- November 2025, a full one-year comparison of SteelOrbis historical data shows that hot-rolled coil pricing has increased nearly 28 percent. By comparison, the price of cold-rolled coils rose 28.5 percent, while hot-dipped galvanized prices rose the most, showing a 35.3 percent jump over the equivalent one-year period.
“I think the flat steel market is topping out,” remarked one US Midwest-based flat steel market insider when asked about the prospects for continued weekly price increases. “Many are saying the market could pull back over the next two months.”
Another contact had much the same response to a weekly request for comment on current pricing dynamics. “Pricing is largely flat,” he said. “I believe the peak has been reached or is very close at this point.”
SteelOrbis weekly pricing surveys find average spot hot-rolled coil (HRC) pricing on an FOB mill basis continued $8/nt higher this week, following last week’s $5/nt advance to $1,138/nt ($1,254/mt), or $56.90/cwt., up from $1,130/nt ($1,246/mt), or $56.50/cwt., a week earlier.
“Nucor pricing for HRC was reported sideways this week for its Consumer Spot Price (CSP),” said yet another flat steel contact to SteelOrbis. “I believe that’s a signal of some slowdown in the market, and I can only assume that demand is beginning to decline at these price levels.”
Charlotte, North Carolina-based Nucor’s CSP -the posted base price it charges for hot-rolled coils (HRC) across all of its regional mills- was reported steady this week, the first such instance in six months, the mill said in a June 29 letter to customers.
Following a 23rd straight increase, the Nucor CSP was reported steady at $1,130/nt ($1,246/mt) or $56.50/cwt., following the prior week’s $5/nt increase on an FOB mill basis. Nucor’s California Steel Industries (CSI) base price, also was unchanged at $1,180/nt ($1,301/mt), or $59.00/cwt., on an FOB mill basis.
“While our CSP price (was) unchanged this week as we monitor import levels as well as domestic and global price dynamics, underlying demand is strong and improving, with current indicators pointing to continued strength through the back half of 2026 and into 2027,” Nucor said in its weekly customer letter.
As previously reported by SteelOrbis on June 18, preliminary data from the US Department of Commerce shows US imports of hot-rolled sheet totaled 35,621 metric tons during April, the nearest month for which actual import data was available, a level 58.5 percent less than in March, and 58.6 percent less than reported during the equivalent period in 2025.
In the cold-rolled markets, the SteelOrbis domestic price average rose another $4/nt to finish the week at $1,349/nt, ($1,487/mt), or $67.45/cwt., compared with last week’s $12/nt rise to $1,345/nt ($1,483/mt), or $67.25/cwt., delivered FOB mill.
Based on an $8/nt rise in weekly HRC prices and another $4/nt bump in weekly CRC values, the current spread between the two key steel grades fell $4/nt on the week to $211/nt, or $10.55/cwt., versus a recent high of $215/nt or $10.75/cwt., reported one week ago.
In the hot-dipped galvenized markets, spot pricing on an FOB mill basis increased the most among SteelOrbis surveyed flat steel products, showing a $13/nt weekly increase to on average $1,353/nt ($1,491/mt), or $67.65/cwt., versus the $1,340/nt ($1,477/mt), or $67.00/cwt., average price reported seven days earlier.
Finished steel contacts told SteelOrbis a developing “more bearish sentiment” for steady to lower monthly ferrous scrap prices combined with declining global oil prices could be helping to unwind recent finished steel price rallies.
At last report, US benchmark West Texas Intermediate crude oil (WTI) sold at $68.50 per barrel (/bbl) on July 3, off from the $69.00-69.50/bbl reported one week prior, and off from about $77/bbl reported two weeks ago. Global Brent Crude oil sold at $72/bbl July 3, little changed versus a week earlier. Prior to the Iran conflict on Feb 27, WTI traded at about $67/bbl, while Brent crude sold between $70-72/bbl.
And while some traders are calling for a pause in recent flat steel price increases, HRC futures pricing continues to show a bullish pattern, with futures pricing averaging for Q3 on the New York Mercantile Exchange July 2 at $1,164/nt ($1,283/mt), or $58.20/cwt., while Q4 HRC futures prices averaged $1,133/nt ($1,249/mt), or $56.65/cwt.