Turkey’s CR flat steel imports up 10 percent in July over June

Friday, 09 September 2011 16:34:18 (GMT+3)   |  

According to the data provided by the Turkish Statistical Institute (TUIK), in July this year Turkey's cold rolled (CR) flat steel imports rose 9.9 percent compared to the previous month, increasing to 49,694 metric tons. The value of these imports amounted to $46.5 million, increasing by 24 percent as compared to June this year.

In July, Turkey's cold rolled flat steel imports from Russia amounted to 19,479 metric tons, increasing by 42.8 percent compared to June this year and accounting for approximately 39 percent of the country's total cold rolled flat steel imports. Turkey's second biggest source of cold rolled flat steel imports in July was Romania with 10,676 metric tons, decreasing by 23 percent month on month.

Meanwhile, in the first seven months of this year, Turkey's cold rolled flat steel imports amounted to 335,906 metric tons, decreasing 18.3 percent compared to the same period last year. Imports from Russia amounted to 140,922 metric tons, decreasing by 14.67 percent, and cold rolled flat steel imports from Romania amounted to 62,636 metric tons, increasing by 63.76 percent, both compared to the same period last year.


Similar articles

Turkey’s CR coil and sheet imports down four percent in 2011

06 Feb | Steel News

Turkey’s cold rolled flat steel imports up 14.5 percent in June over May

12 Aug | Steel News

Local Indian CRC prices stable, but outlook negative due to low industrial restocking

08 Jun | Flats and Slab

Flat steel prices in local Taiwanese market - week 23, 2026

04 Jun | Flats and Slab

US flat steel pricing advances past $1,100/ton, highest spot price since May 2023

03 Jun | Flats and Slab

Japan launches AD probes on CRC and HRC from three countries

01 Jun | Steel News

Local Indian CRC prices edge up as re-rollers complete stock liquidation, outlook still negative

01 Jun | Flats and Slab

Japan's steel exports down 9.3 percent in Jan-Apr 2026

01 Jun | Steel News

Bullish trend continues in US flat steel markets, high pricing could trim construction demand

29 May | Flats and Slab

Gerdau ties investments to stronger barriers against Chinese steel imports in Brazil

29 May | Steel News

Marketplace Offers

Cold Rolled Coil
Thickness:  0.6 mm
Width:  1,000 mm
Coil:   R
DC01
YÜCEL BORU VE PROFİL END. A.Ş.
Cold Rolled Coil
Thickness:  0.3 - 2.5 mm
Width:  700 - 1,300 mm
Coil:   R
DC01-DC03-DC04-DC01EK-DC04EK
YILDIZ DEMIR CELIK
Cold Rolled Batch Annealed Coil
Thickness:  0.3 - 2.5 mm
Width:  700 - 1,300 mm
Coil:   R
Kaliteler / Steel Grades DC01-DC03-DC04-DC01EK-DC04EK
YILDIZ DEMIR CELIK