MOC: Average finished steel price in China down 0.2 percent

Wednesday, 14 October 2015 11:50:40 (GMT+3)   |   Shanghai
On October 13, China's Ministry of Commerce (MOC) announced that during last week (October 5-11) the overall average finished steel price in China decreased by 0.2 percent week on week.

In the given week, average prices of hot rolled sheet (HRS) and common medium plate in China declined by 0.7 percent and 0.6 percent week on week, respectively.

In the same week, the average price of non-ferrous metals in China increased by 0.5 percent compared to the previous week. The average price of nickel (Ni> = 99.2%) rose by 0.1 percent compared to the previous week.

In addition, in the week in question, the average price of coal in China decreased by 0.4 percent week on week. In particular, the average prices of thermal coal and coking coal declined by 0.6 percent and 0.3 percent week on week, respectively, while the average price of anthracite coal remained stable week on week.

Similar articles

MOC: Average finished steel price remains stable in China

06 Nov | Steel News

Ex-Brazil BPI prices keep increasing amid shortage in US market with targets reaching $500/mt FOB

16 May | Scrap & Raw Materials

Mexican ferrous scrap market convoluted as last purported price drops and first sign of increases converge this week

15 May | Scrap & Raw Materials

Brazil heavy plate April exports soar by 117 percent, US still absent from market

15 May | Steel News

US flat steel price edges higher again, May scrap now adds to bullish fundamentals

15 May | Flats and Slab

Global View on Scrap: Turkey’s import prices move up, Asia remains stable

15 May | Scrap & Raw Materials

Ex-Russia BPI prices supported by limited demand

15 May | Scrap & Raw Materials

Global HBI market bullish amid tight supply, ex-Libya tender closure to give further direction

15 May | Scrap & Raw Materials

Import scrap prices in Taiwan remain stable, Japan still absent

15 May | Scrap & Raw Materials

Vietnam’s import scrap market gives mixed signals

15 May | Scrap & Raw Materials

Marketplace Offers

Chequered Sheet
Thickness:  2 - 10 mm
Width:  600 - 1,300 mm
Length:  1,500 - 4,000 mm
St 37-2 DIN 17100
MUTAS DEMIR CELIK SAN TIC .A.S.
Printed Sheet-Pressure Sheets
Thickness:  0.5 - 2 mm
Width:  600 - 1,200 mm
Length:  400 mm
MUTAS DEMIR CELIK SAN TIC .A.S.
Hot Rolled Plate
Thickness:  6 - 12 mm
Width:  1,000 - 1,500 mm
Length:  6,000 - 12,000 mm
DAVUTOĞLU METAL MAK. İNŞ. SAN. TİC. LTD ŞTİ.