Turkish welded pipe market still waits for revival

Monday, 12 September 2011 11:33:27 (GMT+3)   |  

The welded pipe market in Turkey has not picked up yet after the Ramadan holiday. However, the domestic market remains cautious over the Turkish lira losing value against the US dollar and the euro, and European buyers are reluctant to place orders amid the uncertainty in the market. Export quotations of welded pipes from Turkey have remained almost unchanged with a decrease of a maximum of $10/mt in some cases. Domestic prices have also not changed so much: the lower limit has declined by $10/mt, while the upper limit has remained at previous levels. Although the Turkish welded pipe market is expected to witness increased activity later in September, prices will likely stay at current levels for a while, as demand is not sufficient to support increases, market players believe.

Most offers of Turkish ERW pipes and hollow sections of 2-6 mm wall thickness made from hot rolled coil (HRC) of S235JR grade according to EN 10219 are being given to the domestic market at about $790-820/mt ex-works, while ERW pipes of 1.5 mm wall thickness made from CRC are in the range of $870-910/mt ex-works. Water and gas ERW pipes of 2.0-4.5 mm wall thickness made to EN 10255/DIN 2440 from S235 grade HR products are being offered in the domestic market at $790-830/mt ex-works.

Meanwhile, since September 6, local Turkish producer Borusan Mannesmann has decreased discounts on its industrial pipes, water pipes and hollow sections in its stocks from 14 percent to 12 percent for 90-day delay in payment, making its offers higher for local customers. Its quotations for industrial pipes of 60-89 mm outside diameter and 2.5-3.0 mm wall thickness made to EN 10219/EN 10305-3 from HRC are at the level of $845-860/mt ex-works (taking discounts into consideration), while hollow sections of 30 x 30 mm - 60 x 60 mm and 2-4 mm wall thickness are at $815-855/mt ex-works. Taking into account the discount level, Borusan Mannesmann's domestic prices of ½"-4" black water pipes with wall thickness of 2-4 mm made to EN 10255 are in fact at the level of $860-880/mt ex-works.

Turkish producers are offering ERW pipes and hollow sections of 2-6 mm wall thickness made from hot rolled coil (HRC) of steel grade S235 JRH according to EN 10219 or ASTM A500 to foreign customers at around $790-820/mt FOB. Export offers of ERW pipes and hollow sections of 1.5 mm wall thickness made from HRC from most Turkish pipe makers are at around $850-880/mt FOB, while the same products made from cold rolled coil (CRC) are at $880-920/mt FOB. Water and gas ERW pipes of 2.0-4.5 mm wall thickness made to EN 10255 from S235 grade HR products are being offered for export at about $810-850/mt FOB.

Marketplace Offers

ERW Longitudinal Galvanized Flat Pipe

External Diamater 21.7 - 139.7 mm
Wall Thickness 12.7 - 127 mm
 
Tedarikçi CONARES METAL SUPPLY
View Offer

ERW Longitudinal Black Pipe

External Diamater 21.3 - 139.7 mm
Wall Thickness 12.7 - 127 mm
 
Tedarikçi CONARES METAL SUPPLY
View Offer

ERW Longitudinal Black Pipe

External Diamater 21.3 - 114.3 mm
Wall Thickness 1.2 - 6 mm
 
Tedarikçi INCOSTEEL
View Offer

Similar articles

Turkey’s Toscelik reaches 50% capacity at Osmaniye ERW pipe plant

Prices soften in Turkish welded pipe market

Ex-Germany seamless pipe offers to Turkey - week 40

Turkey’s steel pipe exports up 9.8 percent in Jan-Sept

Demand for seamless pipes remains poor in Turkey

Welded pipe prices soften again in Turkey

Welded pipe demand remains low in Italy

Turkey’s seamless pipe imports up 12.4% in July over June

Turkey’s steel pipe exports up 46.6 percent in August

Ex-Romania seamless pipe offers to Turkey - week 37