US plate spot prices falling further behind mill increases

Thursday, 17 September 2009 03:12:03 (GMT+3)   |  

Despite the fact US plate spot prices are still lagging behind last month's $2.00 cwt. ($44 /mt or $40 /nt) mill price increase, US mills announced late last week another $2.00 cwt. increase effective on October orders.

While domestic mills are now attempting to push up transaction prices to approximately $36.00 cwt. to $37.00 cwt. ($794 /mt to $816 /mt or $720 /nt to $720 /nt) FOB mill in the Midwest (for commercial grades -- A36, base sizes, mill plate), most spot offers are still ranging from about $32.00 cwt. to $33.00 cwt. ($705 /mt to $728 /mt or $640 /nt to $660 /nt) for the bigger long-term players with significant tonnage.

The most recent $2.00 cwt. domestic plate increase came as a surprise to some distributors, especially considering that the previous increase had not yet fully resonated in the market. However, many distributors claim to have seen this coming because domestic mills have been trying to capitalize on the current upward pricing momentum in the flat rolled market despite the weak plate demand. Mills may be using the rationalization that they will sell the same amount of plate no matter what price they're at, so they may as well get what they can. One distributor told SteelOrbis, "It's obvious that mills are pushing the button as far as they can. The million dollar question will be whether mills will be able to sustain these prices into November and December, when demand curtails even further."

Overall plate consumption hasn't really improved much heading into the fourth quarter, making it even less likely that mills will be able to continue raising prices - or indeed, even maintain current prices -- through the usual slow holiday months. According to the most recent Metal Service Center Institute (MSCI) monthly shipment and inventory report, while daily shipments of plate tonnage slightly improved from 11,100 nt in July to 11,400 nt in August, monthly shipments declined approximately from 243,000 nt to 240,000 nt for July and August respectively. Monthly ending inventories declined from 734,000 nt in July to 726,000 nt in August; however, estimated inventory overhang remained neutral at approximately 3.0 months.

Nevertheless, while the plate market remains very soft, the current momentum is positive and mills will most likely just try to push through the end of the year and hope for the best.

Furthermore, US mills continue to enjoy some freedom from the lack of any import pressure. Traders inform SteelOrbis that there is nothing going on in the import market as new offshore offers are not attractive given the weak demand and existing import inventories already on the ground from deals gone awry earlier this year.

One trader informed SteelOrbis that he could receive some offers from Malaysia or a couple other sources but that he had no intention of buying so he has not been inquiring.

Marketplace Offers

Hot Rolled Plate

Thickness 8 mm
Width 1,500 mm
Length 6,000 mm
  S 235
Tedarikçi SEÇKİN METAL NAK. SAN VE TİC A.Ş.
View Offer

Hot Rolled Slitted Sheet

Thickness 0.25 - 3 mm
Width 20 mm
Length 0 mm
 
Tedarikçi YILDIZ DEMIR CELIK
View Offer

Hot Rolled Plate

Thickness 8 mm
Width 1,500 mm
Length 6,000 mm
  S 355 J2 + N
Tedarikçi SEÇKİN METAL NAK. SAN VE TİC A.Ş.
View Offer

Similar articles

US plate prices continue to slip on import pressure

US plate market trending sideways after recent price hike

US plate market strong enough to allow price stability

Tight market conditions allow US plate producers to boost prices

US domestic plate market follows upward scrap trend

US plate market - Q4 price increase sticks, more expected for Q1

US plate market - Domestic prices stable while imports trend up

US scrap prices trending sideways

Robust energy market drives US plate demand

US plate market expected to maintain its strength