According to the data released by the Republic of Kazakhstan's Agency of Statistics, in 2010 Kazakhstan registered a 2.6 percent increase year on year in its crude steel production but a 3.1 percent year-on-year decrease in its production of flat rolled steel, to 4.26 million mt and 2.89 million mt respectively. Meanwhile, Kazakhstan's tinplate production for the given year amounted to 194,090 mt - down 3.5 percent, while its galvanized steel output came to 576,000 mt - down 0.9 percent, both compared to 2009
In 2010, Kazakhstan's output of ferroalloys increased by 18.3 percent year on year to 1.74 million mt, while its iron ore pellet production went up by 29.7 percent to 8.02 million mt, both compared to the same period last year. The country's coal output in 2010 increased by nine percent year on year to 110.8 million mt, while its coke output went down 1.3 percent year on year to 2.68 million mt.
Kazakhstan issues 2010 production results
Tags: Iron Ore Alloys Crude Steel Galvanized Raw Mat Flats Kazakhstan CIS Steelmaking Mining Production
Similar articles
Ex-China HRC hits bottom, unlikely to fall much further as mills’ margins negative
14 Jul | Flats and Slab
GCC’s import HRC market sees softer lower-end offers, but buying still limited
14 Jul | Flats and Slab
Marketplace Offers
HDG Coil
Thickness: 0.5 - 4 mm
Width: 1,000 - 1,500 mm
Coil: R
DAVUTOĞLU METAL MAK. İNŞ. SAN. TİC. LTD ŞTİ.
Thickness: 0.5 - 4 mm
Width: 1,000 - 1,500 mm
Coil: R
DAVUTOĞLU METAL MAK. İNŞ. SAN. TİC. LTD ŞTİ.
HDG Trapezoid Sheet
Thickness: 0.25 - 0.47 mm
Width: 925 mm
Length: 0 mm
FALCON STEEL (PTY) LTD
Thickness: 0.25 - 0.47 mm
Width: 925 mm
Length: 0 mm
FALCON STEEL (PTY) LTD
HDG Coil
Thickness: 0.25 - 4 mm
Width: 1 - 1.5 mm
Coil: R
Thickness: 0.25 - 4 mm
Width: 1 - 1.5 mm
Coil: R
DX51-52-53-54-55-56-57 D+Z,s220-280-300-320-360-380-GD etc
BATTALLAR DEMIR SAN. ve TIC LTD. ŞTİ.