US HDG spot prices vary depending on mill and order size

Tuesday, 20 November 2012 01:52:18 (GMT+3)   |   San Diego

Even though the general trend for US domestic coated flat steel spots is pointing upward, prices aren't rising as fast as asking prices. The majority of mills are actively quoting the full $4.50 cwt. ($99/mt or $90/nt) in announced increases over the past month on all new spot orders, but with lead times not fully out of 2012 yet, most buyers are able to secure material at lower prices. Hot dipped galvanized (HDG) and Galvalume base spots are up $1.00 cwt. ($22/mt or $20/nt) on the high end since last week and are now between $35.00-$37.00 cwt. ($772-$816/mt or $700-$740/nt) ex-Midwest mill, compared to asking prices that are between $37.50-$38.50 cwt. ($827-$849/mt or $750-$770/nt) ex-mill. The spot range is wider this week due to the larger than usual disparity in prices customers are able to attain. Some of the larger customers are paying prices on the low end, especially from mills that are more desperate in filling their December order books.

This week is already shaping up to be slow for booking activity given the Thanksgiving holiday and many taking added days off. By next week, though, sources believe that lead times may finally move into Q1 2013, giving hesitant buyers who don't want to stock inventories before the end of the year more confidence in placing orders. Additionally, a third price increase is also rumored to be on the horizon as soon as next week. Until then, order entry is likely to be tepid, especially with US domestic raw steel production rising sharply again. In the last three weeks, production has surged 6.6 percent collectively, making some buyers increasingly hesitant that the current price hikes have lasting power if production levels continue to move up so rapidly.

  Cwt. Metric Ton (mt) Net ton (nt) Change from last week
US domestic HDG base price $35.00-$37.00 $772-$816 $700-$740 ↑ $1.00 cwt. on high end
         
0.012"x40.875" G30        
ex-Midwest mill $45.00-$47.00 $992-$1,036 $900-$940 ↑ $1.00 cwt. on high end
         
0.019"x48" G90        
ex-Midwest mill $45.00-$47.00 $992-$1,036 $900-$940 ↑ $1.00 cwt. on high end
         
US domestic Galvalume base price         
ex-Midwest mill $35.00-$37.00 $772-$816 $700-$740 ↑ $1.00 cwt. on high end
         
0.019x41.5625 Gr80/AZ55        
ex-Midwest mill $45.00-$47.00 $992-$1,036 $900-$940 ↑ $1.00 cwt. on high end

Marketplace Offers

HDG Coil

Thickness 0.5 - 4 mm
Width 1,000 - 1,500 mm
Coil  R
 
Tedarikçi DAVUTOĞLU METAL MAK. İNŞ. SAN. TİC. LTD ŞTİ.
View Offer

Prepainted Coil

Thickness 0.4 mm
Width 1,000 mm
Coil  R
  9002
Tedarikçi OZGUN METAL
View Offer

Prepainted Coil

Thickness 0.4 mm
Width 1,200 mm
Coil  R
  9002
Tedarikçi OZGUN METAL
View Offer

Similar articles

Carbon spot market propels AK Steel to another quarter in the red

Less import competition, longer lead times, give US HDG prices a boost

US HDG spot prices increase further but activity remains reserved

US flat rolled mills successfully push for higher HDG prices

US HDG prices stable but overall market still weak

US HDG prices weaken as lead times remain constrained

US domestic HDG prices sink as mills aim to cut out market deals

Nucor reports lower earnings, sales and capacity utilization in Q1

SDI’s earnings fall sequentially but rise slightly year-on-year

Price descent persists in US HDG market