With early predictions now pointing to another drop in US domestic scrap prices in October, prices for coated flat steel products are likely to follow suit. US domestic hot dipped galvanized (HDG) and Galvalume spot prices have been declining for most of September and the declines are likely to continue into October. Service center buyers are largely holding enough inventory to keep purchasing activity minimal or abstain completely for a short time, according to SteelOrbis sources. But even as buying levels have slowed, mill production levels remain steady to slightly up, increasing another 0.4 percent just last week, according to data Monday from the American Iron and Steel Institute (AISI). As a result, lead times on flat rolled products are short at only four to five weeks on coated products, with material at a few mills available slightly faster due to some excess already-produced inventory.
Additionally, the scrap price declines that began in late August are expected to spill over into October, although it's not yet certain how much prices will drop during next month's buys. Further, cheaper import offer prices from India and China are also putting downward pressure on US prices. So while US HDG base spot prices are stable from last week at $35.50-$36.50 cwt. ($782-$805/mt or $710-$730/nt) ex-Midwest mill, most transactions are taking place on the lower end of the range. The same is true for HDG 0.012"x40.875" G30 and 0.019"x48" G90 prices--although the general spot range is unchanged, the coils are readily available for under $46.00 cwt. ($1,014/mt or $920/nt) ex-Midwest mill to even just average buyers.
| Cwt. | Metric Ton (mt) | Net ton (nt) | Change from last week | |
| US domestic HDG base price | $35.50-$36.50 | $782-$805 | $710-$730 | neutral |
| 0.012"x40.875" G30 | ||||
| ex-Midwest mill | $45.50-$46.50 | $1,003-$1,025 | $910-$930 | neutral |
| 0.019"x48" G90 | ||||
| ex-Midwest mill | $45.50-$46.50 | $1,003-$1,025 | $910-$930 | neutral |
| US domestic Galvalume base price | ||||
| ex-Midwest mill | $35.50-$36.50 | $782-$805 | $710-$730 | ↓$0.50 cwt. |
| 0.019x41.5625 Gr80/AZ55 | ||||
| ex-Midwest mill | $45.50-$46.50 | $1,003-$1,025 | $910-$930 | neutral |