US domestic HDG prices resume downward movement

Tuesday, 26 February 2013 01:54:38 (GMT+3)   |   San Diego

After holding relatively stable throughout February, US domestic hot dipped galvanized (HDG) prices have once again slipped. Overall, buyers have kept purchasing activity to a minimum over the last few months, making it difficult for mills to fill up order books. Earlier this month, mills were able to firm up spot prices slightly as some were adamant about achieving higher prices with each new order. However, sources tell SteelOrbis that order entry has been too light for mills to hold on to the higher prices. Since last week, HDG base prices fell $1.00 cwt. ($22/mt or $20/nt) on the low end into the wider range of $34.00-$36.00 cwt. ($750-$794/mt or $680-$720/nt) ex-Midwest mill. As a result, HDG 0.012"x40.875" G30 and HDG 0.019"x48" G90 prices have dropped by a similar level and can now be found between $44.00-$46.00 cwt. ($970-$1,014/mt or $880-$920/nt) ex-Midwest mill.

So far, Galvalume prices have been heard below previous levels but with the market already dominated by imports, slack domestic demand hasn't had a significant impact on prices just yet. With US scrap prices now anticipated to increase slightly in March, flat rolled spots may not be under as much downward pressure in the next couple weeks. Industry insiders say they are hopeful that if scrap prices increase next month and flat rolled buyer inventories finally deplete a bit, it may be enough to help spur purchasing activity enough to extend mill lead times.

  Cwt. Metric Ton (mt) Net ton (nt) Change from last week
US domestic HDG base price $34.00-$36.00 $750-$794 $680-$720 ↓$1.00 cwt. on low end
         
0.012"x40.875" G30        
ex-Midwest mill $44.00-$46.00 $970-$1,014 $880-$920 ↓$1.00 cwt. on low end
         
0.019"x48" G90        
ex-Midwest mill $45.00-$46.00 $970-$1,014 $880-$920 ↓$1.00 cwt. on low end
         
US domestic Galvalume base price         
ex-Midwest mill $35.00-$36.00 $772-$794 $700-$720 neutral
         
0.019x41.5625 Gr80/AZ55        
ex-Midwest mill $45.00-$46.00 $992-$1,014 $900-$920 neutral

Marketplace Offers

HDG Coil

Thickness 0.5 - 4 mm
Width 1,000 - 1,500 mm
Coil  R
 
Tedarikçi DAVUTOĞLU METAL MAK. İNŞ. SAN. TİC. LTD ŞTİ.
View Offer

Prepainted Coil

Thickness 0.4 mm
Width 1,000 mm
Coil  R
  9002
Tedarikçi OZGUN METAL
View Offer

Prepainted Coil

Thickness 0.4 mm
Width 1,200 mm
Coil  R
  9002
Tedarikçi OZGUN METAL
View Offer

Similar articles

Carbon spot market propels AK Steel to another quarter in the red

Less import competition, longer lead times, give US HDG prices a boost

US HDG spot prices increase further but activity remains reserved

US flat rolled mills successfully push for higher HDG prices

US HDG prices stable but overall market still weak

US HDG prices weaken as lead times remain constrained

US domestic HDG prices sink as mills aim to cut out market deals

Nucor reports lower earnings, sales and capacity utilization in Q1

SDI’s earnings fall sequentially but rise slightly year-on-year

Price descent persists in US HDG market