US domestic HDG prices register significant one-week drop

Tuesday, 02 October 2012 01:39:47 (GMT+3)   |  

Coated flat steel spot prices in the US have dropped by $1.00 cwt. ($22/mt or $20/nt) across the board since last week. Currently, purchasing activity levels in the US for flat steel products are minimal with most buyers sitting on the sidelines until the very last minute when it comes to placing an order. Consequently, the market appears far away from an inflection point and end to the price deterioration given that scrap prices could sink as much as $30-$50/lt in some regions during October buys. The scrap price drop will force flats mills to be more flexible with lowering prices, by at least a portion of what the scrap price drops settles at, according to SteelOrbis sources.

Just in the past week, US domestic hot dipped galvanized and Galvalume base spot prices fell to $34.50-$35.50 cwt. ($761-$782/mt or $690-$710/nt) ex-Midwest mill. However, there are deals being made under the range for anyone looking to make a big purchase. HDG 0.012"x40.875" G30 and HDG 0.012"x40.875" G30 prices are now $44.50-$45.50 cwt. ($981-$1,003/mt or $890-$910/nt) ex-Midwest mill, with rumblings of some mills going as much as $1.00 cwt. below the bottom end of the range. As is common in a declining market, buyer sources have said that prices for value-added products are falling the fastest as mills attempt to keep spots for hot rolled coil (HRC) and cold rolled coil (CRC) as high as possible.

  Cwt. Metric Ton (mt) Net ton (nt) Change from last week
US domestic HDG base price $34.50-$35.50 $761-$782 $690-$710 ↓$1.00 cwt.
         
0.012"x40.875" G30        
ex-Midwest mill $44.50-$45.50 $981-$1,003 $890-$910 ↓$1.00 cwt.
         
0.019"x48" G90        
ex-Midwest mill $44.50-$45.50 $981-$1,003 $890-$910 ↓$1.00 cwt.
         
US domestic Galvalume base price         
ex-Midwest mill $34.50-$35.50 $761-$782 $690-$710 ↓$1.00 cwt.
         
0.019x41.5625 Gr80/AZ55        
ex-Midwest mill $44.50-$45.50 $981-$1,003 $890-$910 ↓$1.00 cwt.

Marketplace Offers

HDG Coil

Thickness 0.5 - 4 mm
Width 1,000 - 1,500 mm
Coil  R
 
Tedarikçi DAVUTOĞLU METAL MAK. İNŞ. SAN. TİC. LTD ŞTİ.
View Offer

Prepainted Coil

Thickness 0.4 mm
Width 1,000 mm
Coil  R
  9002
Tedarikçi OZGUN METAL
View Offer

Prepainted Coil

Thickness 0.4 mm
Width 1,200 mm
Coil  R
  9002
Tedarikçi OZGUN METAL
View Offer

Similar articles

Carbon spot market propels AK Steel to another quarter in the red

Less import competition, longer lead times, give US HDG prices a boost

US HDG spot prices increase further but activity remains reserved

US flat rolled mills successfully push for higher HDG prices

US HDG prices stable but overall market still weak

US HDG prices weaken as lead times remain constrained

US domestic HDG prices sink as mills aim to cut out market deals

Nucor reports lower earnings, sales and capacity utilization in Q1

SDI’s earnings fall sequentially but rise slightly year-on-year

Price descent persists in US HDG market