Price increases from US domestic flat rolled mills have positively impacted hot dipped galvanized (HDG) spot prices. Many mills have pulled some of the lowest price deals off the table over the last week and have been pushing for higher prices. For the time being, sources tell SteelOrbis that not all customers have been forced to pay higher prices, and mills have not yet been enforcing the full $2.00 cwt. ($44/mt or $40/nt) increase, but are beginning to quote about half of the increase to a growing number of buyers. Immediately after the increase was announced about two weeks ago, many buyers stocked up depleted inventories at previous prices and so many have not yet been forced to pay higher prices.
However, with a second price increase looming, even larger buyers are likely to be forced to pay at least a portion of the increase. Already since last week, US domestic HDG and Galvalume base prices have increased $1.00 cwt. ($22/mt or $20/nt) on the high end to $33.00-$35.00 cwt. ($728-$772/mt or $660-$700/nt) ex-Midwest mill. Meanwhile, spots for certain products with coating extras have increased by a full $1.00 cwt. HDG 0.012"x40.875" G30 spot prices, for example, are now up to $44.00-$45.00 cwt. ($970-$992/mt or $880-$900/nt) ex-Midwest mill, following numerous deals heard as much as $2.00 cwt. lower just a couple weeks ago. While the majority of the lowest deals have dissipated for the time being, industry insiders have said that certain mills with added availability are still making a few price cuts as needed in order to try and fill up December order books.
| Cwt. | Metric Ton (mt) | Net ton (nt) | Change from last week | |
| US domestic HDG base price | $33.00-$35.00 | $728-$772 | $660-$700 | ↑ $1.00 cwt. on the high end |
| 0.012"x40.875" G30 | ||||
| ex-Midwest mill | $44.00-$45.00 | $970-$992 | $880-$900 | ↑ $1.00 cwt. |
| 0.019"x48" G90 | ||||
| ex-Midwest mill | $44.00-$45.00 | $970-$992 | $880-$900 | ↑ $1.00 cwt. |
| US domestic Galvalume base price | ||||
| ex-Midwest mill | $33.00-$35.00 | $728-$772 | $660-$700 | ↑ $1.00 cwt. on the high end |
| 0.019x41.5625 Gr80/AZ55 | ||||
| ex-Midwest mill | $44.00-$45.00 | $970-$992 | $880-$900 | ↑ $1.00 cwt. |