STFA developed working affiliations in N.Africa and MiddleEast

Tuesday, 22 July 2003 14:38:00 (GMT+3)   |  

STFA developed working affiliations in N.Africa and MiddleEast

General Electric Company of Libya (GECOL) held a tender for 400 kV Tripoli-Sirt-Agdabia/Sirt–Houn-GMMR-1 Overhead Transmission Line project in Libya and STFA Insaat A.S. is awarded for GMMR-1-Houn to Sirt part of the tender which is 500 km in length and signed an agreement on July 7, 2003. According to the agreement worth $101 million, the project is on turn-key basis and includes STFA's services, material supply, construction, assembly, tests and putting into operation. During the construction process, 19'305 tonnes of galvanized steel and 5.500 km of conductor is planned to be used in 1'189 pole. Furthermore STFA Temel Kaziklari Insaati A.S., owned by STFA Group, is going to conduct the “Jumeirah Beach Residence Piling Works JBR4 & JBR6” project in Dubai, United Arab Emirates. The project, is scheduled to start on July 27, 2003 and will cost 61.911.210 UAE Dirham (USD 16.961.975). Vendor of the project is Dubai Technology, Electronic Commerce & Media Free Zone Authority. Under the scope of this project, in total 86'390 metre of screw pile in 20-40m length with dia. ranging between 900-1200 mm will be produced. Project is expected to be completed in 7 months.

Similar articles

Middle East flat markets sees slight gain in activity, new investments on the way

21 Apr | Flats and Slab

US flat steel prices steady to up; cold weather, slim imports and scrap support

07 Feb | Flats and Slab

Coated and CR demand quiet in Turkey, pressure on exports increases

06 Feb | Flats and Slab

European CRC and HDG prices edge higher amid tight supply despite weak demand

06 Feb | Flats and Slab

Flat steel prices in local Taiwanese market - week 6, 2026

05 Feb | Flats and Slab

Indian HDG exports remain at standstill amid low bids, lower galvanizing by mills

05 Feb | Flats and Slab

Ex-China HDG offers remain stable, weaker HRC futures weigh on HDG market sentiment

05 Feb | Flats and Slab

US HDG imports down 27.9 percent in November 2025

05 Feb | Steel News

US HDG exports up 14.4 percent in October 2025

04 Feb | Steel News

Turkey’s Borçelik exports 80% of output, focuses on EU, Balkans and N. America

02 Feb | Steel News

Marketplace Offers

HDG Coil
Thickness:  1.1 mm
Width:  1,000 mm
Coil:   R
DX51D+Z70
YÜCEL BORU VE PROFİL END. A.Ş.
Galvanized Cut-To-Length Sheet
Thickness:  0.25 - 2 mm
Width:  700 - 1,300 mm
Length:  400 - 3,000 mm
YILDIZ DEMIR CELIK
Galvanized Slitted Coil
Thickness:  0.25 - 3 mm
Width:  20 mm
Coil:   R
YILDIZ DEMIR CELIK