Overview of Turkish steel exports and global markets - Kocturk

Friday, 23 May 2008 18:03:01 (GMT+3)   |  

Chairman of the Istanbul Iron and Steel Exporters' Association, Serdar Kocturk, stated in his address at the 3rd SteelOrbis Turkish Steel Market Conference held in Istanbul on Friday that steel consumption statistics and steel prices are moving in accordance with expansions in gross national product growth rates across the world.

According to the statistics for 2007, 67 percent of Turkish steel exports were made up of long products with 10.9 million mt, billet accounted for 10 percent with 1.568 million mt, pipe constituted 10 percent with 1.563 million mt, while flat products represented seven percent of exports with 1.210 million mt.

Flat products accounted for 60 percent of Turkey's iron and steel imports in 2007 with 7.897 million mt while billet exports were observed to constitute 19 percent at 2.484 million mt. In the same year, long products accounted for around seven percent of imports with 949,000 mt, special steel products stood at over seven percent with 972,000 mt and slab accounted for under seven percent with 907,000 mt.

The UAE stands out as the most important export market for Turkey. Indeed, for 2008 Turkey's rebar  exports to this destination are forecasted to reach 7-7.2 million mt.

In the context of the growth in the world economy, if the expectation for growth increase in 2008 and 2009 is fulfilled, it is not possible to detect any factors capable of triggering a downward movement in steel prices.

Mr. Kocturk stated that it is impossible to see a softening in iron ore prices (one of the most important factors in steel production), especially assuming that deep sea iron ore demand from China in particular will maintain its strong tendency. Koçtürk stressed the important influence iron ore can have on steel costs by remarking that after the 2.5 percent reduction observed in iron ore supply in Q1 this year iron ore prices registered an increase of 65 percent. He also pointed out that no halt in the upward movement of raw materials like ferrochromium and ferromanganese has been forecasted from 2006 to the present.

 The capital accumulation in oil producing countries is a major incentive for investment. The investments in question keep the construction sector alive and create strong steel demand. Mr. Koçtürk also, however, signalled the existence of some risks. Along with expectations for oil prices moving in a range of $100-130 per barrel, there also exists the possibility of oil prices increasing to over $200 and decreasing down to $75. Although the general tendency in markets like the US is to keep inventory levels low and to buy predominantly from the spot market, it is also observed that the approach of taking positions is being adopted.

According to Mr. Kocturk  in the context of position-taking it is possible that the market may be jeopardized by the sudden injection of accummulated supplies.

Mr. Kocturk also stated that the prices should be assessed in the framework of soaring parity and inflation.


Similar articles

Attendees of the SteelOrbis Steel Trade conference "look for the light"

13 Jul | Steel Matters

Ex-Brazil BPI prices keep increasing amid shortage in US market with targets reaching $500/mt FOB

16 May | Scrap & Raw Materials

Mexican ferrous scrap market convoluted as last purported price drops and first sign of increases converge this week

15 May | Scrap & Raw Materials

US flat steel price edges higher again, May scrap now adds to bullish fundamentals

15 May | Flats and Slab

Global View on Scrap: Turkey’s import prices move up, Asia remains stable

15 May | Scrap & Raw Materials

Ex-Russia BPI prices supported by limited demand

15 May | Scrap & Raw Materials

Global HBI market bullish amid tight supply, ex-Libya tender closure to give further direction

15 May | Scrap & Raw Materials

Import scrap prices in Taiwan remain stable, Japan still absent

15 May | Scrap & Raw Materials

Vietnam’s import scrap market gives mixed signals

15 May | Scrap & Raw Materials

Daily iron ore prices CFR China - May 15, 2026

15 May | Scrap & Raw Materials

Marketplace Offers

ERW Longitudinal Black Pipe
External Diamater:  21.3 - 323.9 mm
Wall Thickness:  2 - 12.5 mm
S195T / P235JRH
ARKON ÇELİK SAN. VE TİC. LTD. ŞTİ.
ERW Longitudinal Black Pipe
External Diamater:  21.3 - 323.9 mm
Wall Thickness:  2 - 12.5 mm
S195T / P235JRH
ARKON ÇELİK SAN. VE TİC. LTD. ŞTİ.
ERW Longitudinal OCTG Line Pipe
External Diamater:  21.3 - 323.9 mm
Wall Thickness:  2 - 12.5 mm
Gr B / X42
ARKON ÇELİK SAN. VE TİC. LTD. ŞTİ.