Kazakhstan issues January production results

Tuesday, 16 February 2010 13:41:36 (GMT+3)   |  

According to the data released by the Republic of Kazakhstan's Agency of Statistics, in January 2010 the country registered an 8.25 percent year-on-year increase in its crude steel production but a 7.8 percent year-on-year decrease in its production of flat rolled steel, to 290,087 mt and 212,560 mt respectively. Meanwhile, the country's tinplate production amounted to 17,256 mt - up 135.5 percent, and its galvanized steel output amounted to 45,700 mt - up 56.9 percent, both compared to January 2009.

In January this year, Kazakhstan's output of ferroalloys increased by 84.47 percent year on year to 148,223 mt, its iron ore pellets production went up by 365 percent to 738,900 mt, while its iron ore production increased by 200 percent to about 4.1 million mt, all compared to the data for January 2009.


Similar articles

Kazakhstan issues 2009 production results

15 Jan | Steel News

Brazilian slab export price eases slightly though remains near two-year highs

08 Jun | Scrap & Raw Materials

Nucor CSP up for 21st week on domestic demand, low imports, energy strength

08 Jun | Flats and Slab

Turkey’s local and export HRC prices slip amid weak sales, market uncertainty

08 Jun | Flats and Slab

Chinese mills’ margins to remain squeezed by continued rise of coking coal and coke prices

08 Jun | Scrap & Raw Materials

Daily iron ore prices CFR China - June 8, 2026

08 Jun | Scrap & Raw Materials

Ex-China steel plate prices relatively stable, may soften in near future

08 Jun | Flats and Slab

Silicomanganese prices in local Chinese market - week 24, 2026

08 Jun | Scrap & Raw Materials

Local Indian CRC prices stable, but outlook negative due to low industrial restocking

08 Jun | Flats and Slab

Local molybdenum and ferromolybdenum prices in China - week 24, 2026

08 Jun | Scrap & Raw Materials

Marketplace Offers

HDG Coil
Thickness:  0.5 - 4 mm
Width:  1,000 - 1,500 mm
Coil:   R
DAVUTOĞLU METAL MAK. İNŞ. SAN. TİC. LTD ŞTİ.
HDG Trapezoid Sheet
Thickness:  0.25 - 0.47 mm
Width:  925 mm
Length:  0 mm
FALCON STEEL (PTY) LTD
HDG Coil
Thickness:  0.25 - 4 mm
Width:  1 - 1.5 mm
Coil:   R
DX51-52-53-54-55-56-57 D+Z,s220-280-300-320-360-380-GD etc
BATTALLAR DEMIR SAN. ve TIC LTD. ŞTİ.